Fourpegsbmx Metric Titanium Vorbauschrauben / Stem Bolts Black

Remove unnecessary weight from your stem with a set of these metric titanium BMX stem bolts.

These will fit all BMX stems with an M8 x 1.25mm thread.

No stem is included! Only the 6 bolts!

Most stems that are not from the brand Profile or S&M*, have metric size bolts and these should work. Tested on Eclat, Cult, Nous, Autum, Snafu, WTP Kira. If you are not sure, measure your current bolt´s head width and thread length.

Weight: 39 grams / 6 bolts (a set of 6 steel bolts is usually 80-85g)

Thread: M8 x 1.25mm

Bolt head width: 10,8mm
You need a 6mm hex tool (Inbus)
Length of the threaded area: 22mm

Price is for 6 stem bolts.

It is essential that you apply anti-seize when installing any titanium BMX parts to prevent seizing. You can find this in our tools section.

Check your bolts before every session and after a crash, tighten them if needed but do not overtighten them. Always use a titanium grease (anti seize). 

Verpackungseinheit: 6 Vorbauschrauben
Packaging Unit: 6 Stem bolts

*S&M also uses metric bolts, but those bolt heads are usually bigger. So these bolts could work but maybe optically they will have too small heads. Measure your bolt´s head before buying if you want to use this with S&M and Fit stems.