Our home made plastic pegs. We designed and produced these pegs for the modern flatland rider, who looks for a light and durable flatland peg, which can be used preferably with or without griptape.
Tested by: Fulop Vidakovich (Pro Category Champion of Hungary 2018) David Nagy (Flatland Legend) Irina Prima Sadovnik (UCI World Champion in Chengdu 2019)
V1 and V2 versions sold about 300pairs worldwide, no1 pegs in Hungary for flatlanders.
80g weight / peg
160g/pair w/o griptape.
For 10mm axle. Can be easily drilled to 14mm.
Handmade in Hungary. Sold in PAIRS!
You can pick if you want griptape or not! Many riders took it off after purchase so we did not include them if you dont want it. We recommend to cover 1/2 of the peg from the fork to the middle with griptape and leave the rest without it, to make pivot tricks easier.
Protects your frame and fork! It is not so rigid like metal pegs and absorbs shock from the crashes! Will not cut your hands or feet!
Please note: - All plastic pegs are less durable in cold weather and can break when the temperature is under 5 degrees celsius or less. We dont warrant this use. - Plastic pegs are mostly for weight savings and a shorter lifespan can be expected compared to alu or steel pegs. - When used on hard asphalt, the pegs can be "shorter" as they are used up. - ALWAYS use a washer between the peg and the axle nut / female bolt. - DONT overtighten the bolts / nuts! It can break the peg! We dont warrant this! More then 100 users could tighten it normally and it is functioning to this day. - Can slip with chrome frames and forks! Since chrome is more slippery compared to normal paintjob or especially matte frames. - NOT intended for street or park use!
This is a real flatland peg, which saves you a lot of weight and gives you more control! Can be replaced cheaply, won´t scratch up your frame and will not cut your hands!
Photos by: Sevisual, David Nagy, Rob Alton, Irina Sadovnik
If your ride a lot (3-4 sessions per week for 2-3 hours, or you consider yourself a master/pro rider) we recommend to replace the pegs every 1,5 years approximately. This can prevent unsuspected breaks or injuries. However we have lots of pairs running for 7+ years for now.