Fourpegsbmx Profile/Madera Titanium Vorbauschrauben / Stem Bolts Raw

Remove unnecessary weight from your stem with a set of these imperial titanium BMX stem bolts.

No stem is included! Only the 6 bolts!

These bolts will fit stems with imperial (inch) threads, like Profile, Madera, some older S&M stems (not the new ones). If you are not sure, measure your current bolt´s head width and thread length. The bolts are not made by Profile.

Weight: 41 grams / 6 bolts (a set of 6 steel bolts is usually 80-85g)

Thread: 5/16 x 18tpi

Bolt head width: 11,7mm
You need a 6mm hex tool (Inbus)
Length of the threaded area: 21mm
Full length: 30mm
Material Ti-6Al-4V Grade 5

Price is for 6 stem bolts.

It is essential that you apply anti-seize when installing any titanium BMX parts to prevent seizing. You can find this in our tools section.

Check your bolts before every session, tighten them if needed but do not overtighten them. Always use a titanium grease (anti seize). 

Verpackungseinheit: 6 Vorbauschrauben
Packaging Unit: 6 Stem bolts