Profile Racing Mulville Push Topload Stem Red
Profile Racing Mulville Push Topload Stem Red
Low stock: 1 in stock
Product description:
MARK MULVILLE PUSH STEM
Due to anodizing, some minor color differences can happen in comparison to the product picture.
- All of these red Push stems are new stock and have the recessed top bolt hole.
- Alle diese rote Push Vorbauten sind aus der neuen Generation und alle wurden deswegen mit einem versenkten Lenkrohrloch aktualisiert.
-The “Push” stem is named after Mark’s favorite trails.
-Locates bars 23mm (.9 inches) higher than the Acoustic Stem.
Uses 1/4″ Allen wrench (6,3mm)- das heißt - 6mm Inbus ist zu klein! Du kannst es verwenden aber es ist ein bisschen zu klein für die Schraube.
Du brauchst ein 1/4 inch Inbus!
Reach: 48mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
Clamp bolts: 5/16″x18tpi (x4)
Pinch Bolts: 5/16″x18tpi (x2)
Weight: with chromo bolts: 283g/9.95oz with titanium bolts: 253g/8.95oz
Reach: 53mm
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
Clamp bolts: 5/16″x18tpi (x4)
Pinch Bolts: 5/16″x18tpi (x2)
Weight: with chromo bolts: 297g/10.45oz with titanium bolts: 267g/9.45oz
Reach: 58mm - on special order, please reach out if you want to order it.
Stack Height: 33mm
Rise: 31.7mm (Upright) / 1.3mm (Invert)
Clamp bolts: 5/16″x18tpi (x4)
Pinch Bolts: 5/16″x18tpi (x2)
Weight: with chromo bolts: 310g/10.85oz with titanium bolts: 280/9.85oz
Uses 1/4″ Allen wrench
Verpackungseinheit: 1 Vorbau
Manufacturer´s Info (GPSR)
Manufacturer´s Info (GPSR)
In case of a product safety question please contact us or the following: