Fourpegsbmx Metric Titanium Vorbauschrauben / Stem Bolts Raw
Fourpegsbmx Metric Titanium Vorbauschrauben / Stem Bolts Raw
6 auf Lager
Verfügbarkeit für Abholungen konnte nicht geladen werden
Inventar Info: Auf Lager bedeutet, dass die Ware in Wien ist und wird in der Regel innerhalb von 1-3 Werktagen versandt. Falls Nicht vorrätig angezeigt ist: die Ware ist momentan ausverkauft.
Produktbeschreibung:
Remove unnecessary weight from your stem with a set of these metric titanium BMX stem bolts.
These will fit all BMX stems with an M8 x 1.25mm thread.
No stem is included! Only the 6 bolts!
Most stems that are not from the brand Profile or S&M*, have metric size bolts and these should work. Tested on Eclat, Cult, Nous, Autum, Snafu, WTP Kira. If you are not sure, measure your current bolt´s head width and thread length.
Weight: 39 grams / 6 bolts (a set of 6 steel bolts is usually 80-85g)
Thread: M8 x 1.25mm
Bolt head width: 10,8mm
You need a 6mm hex tool (Inbus)
Length of the threaded area: 22mm
Price is for 6 stem bolts.
It is essential that you apply anti-seize when installing any titanium BMX parts to prevent seizing. You can find this in our tools section.
Check your bolts before every session, tighten them if needed but do not overtighten them. Always use a titanium grease (anti seize).
Verpackungseinheit: 6 Vorbauschrauben
Packaging Unit: 6 Stem bolts
*S&M also uses metric bolts, but those bolt heads are usually bigger. So these bolts could work but maybe optically they will have too small heads. Measure your bolt´s head before buying if you want to use this with S&M and Fit stems.
